Irta VX STD Standard Packaging Machine

Packaging Machinery > Vffs Packaging  > Multiformat > Irta VX STD Standard Packaging Machine

Irta VX STD | Standar Multiformat packaging machine

The Irta VX STD multiformat packaging machine was conceived for those manufacturers who need to pack in pillow type bags, both flat bottomed or not, at high speeds, ensuring top quality and with the ability to change sizes.

The Irta VS STD multiformat vertical packaging machine is top of the range in the frozen food industry as it is built to resist the most adverse conditions such as wet areas and extreme temperatures.

Envasadora vertical  Irta VX STD


Almohadilla básica
Pillow type Bags
Bags / Pillow Pack
Block Bottom Bag
Block Bottom Bag
Bags / Block Bottom
Gusseted Bag
Bags / Gusseted
Download the commercial brochure of the Irta VX STD standard packaging machine


Film feed

Automatic film feed by means of servo drive unwinding system.

An electronically controlled linear unwinding system is applied tangentially to the reel.


The configuration of the machine allows us to produce a wide range of sizes from 40mm to 350mm (bag width). It also permits the of use both round and rectangular formers with vertical, central or asymmetrical seams. Production of pillow type bags with central or side (invisible) seams.


When trying to optimize production, filling is one of the elements to take into consideration. Our system guarantees perfect synchronization between the dosage unit, the pull system (freefall/freeflow) and the jaw sealers taking into account the type of product and the type of seam which the plastic requires.

Sealing and cutting

A correct thermoseal, which ultimately determines the quality and impermeability of the package, depends on the length of time of the sealing, the compression of the jaws and the temperature used. Another extremely important factor in optimizing productivity is adjusting the horizontal jaw according to the shape of the bag.


  • Chassis finish: AISI-304 stainless steel and anodized aluminium
  • Maximum output: 110 cycles/min
  • Dimensions (mm): 2250 x 1557 x 1719 mm
  • Approximate weight: 800 kg
  • Maximum reel width: 780 mm
  • Diámetro máximo bobina 400 mm.
  • Diameter of reel mandrel: 75 mm
  • Type of protection: IP 55
  • Power supply: 230/400 VCA
  • Air consumption: 12 NI/cycle
  • Energy consumption: 5.5 KVA
  • Bag width: (min-max): 50-350 mm
  • Bag length (min-max): 40-500 mm


  • Equipped with the latest electronic and servo drive technology (Rockwell).
  • Servo drives on the conveyor system and the sealing jaws.
  • BUS ETHERNET interface control.
  • 10” colour touch screen.
  • Incorporated Motion control drive systems.
  • Becker vacuum belt film feed system.
  • FESTO Pneumatics.
  • Temperature, time and sealing pressure controlled from touch screen.
  • Ability to memorize formats. Easy, quick change-over of forming parameters.


  • Safety system around jaw sealing unit.
  • Block bottom system.
  • Tilted tray at product output.
  • Macular detector for centering the length of the bag.
  • Manual coil alignment adjustable from the control panel.


Have any questions? Would you like further information about any of our machines? If so please contact us for the details.