Pillow type Bags
Bags / Pillow Pack
Irta’s engineering expertise in vertical packaging has succeeded in creating a robust, reliable machine at a substantially lower price than would normally be charged in this category. Within the range of compact automatic machines, the Irta vertical XT MM machine incorporates the most advanced and reliable technology and electronics currently available.
The Irta XT MM low cost packaging machine is intended for those manufacturers who do not need the high performance of the more sophisticated VX models but who are looking for reliable and versatile machines capable of producing the most common bags in their different sizes with a simple change of the forming tube.
If you package your products using pillow packs or block bottom pillow packs this is the perfect machine as it also permits the addition of accessories such as zipper, EuroHole and easy-open closures giving the product a more up-market look.
BAGS WHICH THEY MANUFACTURE
Block Bottom Bag
Bags / Block Bottom
Gusseted Bag
Bags / Gusseted
FUNCTIONS OF THE PACKAGING MACHINE
Film feed
Automatic film feed by means of servo drive unwinding system. An electronically controlled linear unwinding system is applied tangentially to the reel varying the speed in relation to the remaining diameter of the reel so that the film is always tense.
Shaping/Forming
The configuration of the machine allows us to produce a wide range of sizes from 60mm to 260mm (bag width). It also permits the use of both round and rectangular formers with vertical, central or asymmetrical seams.
Filling
When trying to optimize production, filling is one of the factors to take into consideration. Our system guarantees perfect synchronization between the dosage unit, the pull system (freefall/freeflow) and the jaw sealers taking into account the type of product and the type of seam which the plastic requires.
Sealing and cutting
A correct thermoseal which ultimately determines the quality and impermeability of the package, depends on the length of time of the sealing, the compression of the jaws and the temperature used. Another important characterisic is the possibility of optimizing output by opening the horizontal jaw according to the format of the bag.
SPECIFICATIONS
- Chassis finish: AISI-304 stainless steel and anodized aluminium.
- Maximum output: 100 cycles/min
- Dimensions (mm): 2560 x 1200 x 1800 mm.
- Approximate weight: 650 kg
- Maximum reel width: 580 mm.
- Maximum reel diameter: 400 mm.
- Diameter of reel mandrel: 75mm.
- Type of protection: IP 55
- Power supply: 230/400VCA
- Air consumption: 12 NI/cycle
- Energy consumption: 4.5 KVA
- Bag base: (min-max): 60-260 mm.
- Bag length (min-max): 40-450 mm.
ELECTRONICS
- Equipped with the latest electronic and servo drive technology (Rockwell).
- Servo drives on the pulling system and the sealing jaws.
- BUS ETHERNET interface control.
- 6” color touch screen.
- Incorporated Motion control drive systems.
- Conveyor system powered by Becker vacuum pumps.
- FESTO Pneumatics.
- Temperature, time and sealing pressure controlled from touch screen.
- Ability to memorize formats. Easy, quick change-over of forming parameters.
FUNCTIONAL CHARACTERISTICS
- Safety system around jaw sealing unit. (Safety guard system)
- Block bottom system.
- Tilted tray at product output.
- Macular detector for centering the length of the bag.
- Manual coil alignment adjustable from the control panel.
