Wide range of options in multi-head weighers. We manufacture numerous models which are geared towards production requirements of every kind product type and bag size. These multi-head weighers offer the precision needed along with high output.
IGP10-16
Technical Data
- Fitted with 10 loading compartments (cells)
- Weighing done on standard loading cells with an overload stop.
- Divisions of 0.1 grams.
- Precision weighing between ±0.1 – 1.5 gr
- Maximum capacity 10 – 1,500 gr.
- Stepper motor driven (no need for compressed air)
- Maximum weighing speed 70 r.p.m.
- Stainless steel finish.
Unit formed of:
- Rockwell electronics
- Central rotating Hopper
- Anti-condensation system using injected air when machine is stopped.
- Ten independently tilting, horizontal vibrators equipped with variable electronic controls.
- Ten feeder hoppers each with stepper motor with a capacity for 1.6 litres.
- Ten weight sensors.
Application
- This machine is suitable for weighing granules such as cereals, seeds, granulated coffee and also pasta, sweets, potato chips, nuts, biscuits, chocolates, pet food, frozen food and so on.
- It is also suitable for non-food products such as nuts and bolts and plastic components.
Main characteristics
- The original program can be reset.
- Easy cleaning and maintenance. All the hoppers can stay open.
- Counting function (mode).
- IP65 certified.
- Rejects over/underweight product.
- Angle of motor can be adjusted to cater for different products.
- Preselection of up to 99 types of program.
Special characteristics
- Modular electronic system makes additions and maintenance much easier and inexpensive.
- Much simpler HMI property management software/program.
- HMI programme can be updated by the U-drive (U-disk).
- PLC control system applied to the scale results in much lower failure rate.
- Software updateable/upgradeable through memory card.
- Optional remote control system.
- Optional: Ethernet board.
IGP10-25
Technical Data
- Fitted with 10 loading compartments (cells)
- Weighing done on standard loading cells with an overload stop.
- Divisions of 0.1 grams.
- Precision weighing between 0.2 – 2 gr.
- Maximum capacity 10 – 1,500 gr.
- Stepper motor driven (no need for compressed air)
- Maximum weighing speed 70 r.p.m.
- Stainless steel finish.
Unit formed of:
- Rockwell electronics
- Central rotating Hopper
- Anti-condensation system using injected air when machine is stopped.
- Ten independently tilting, horizontal vibrators equipped with variable electronic controls.
- Ten feeder hoppers each with stepper motor with a capacity for 2.5 litres.
- Ten weighing hoppers each with stepper motor with a capacity for 2.5 litres.
- Ten weight sensors.
Application
- This machine is suitable for weighing granules such as cereals, seeds, granulated coffee and also pasta, sweets, potato chips, nuts, biscuits, chocolates, pet food, frozen food and so on.
- It is also suitable for non-food products such as nuts and bolts and plastic components.
Main characteristics
- The original program can be reset.
- Easy cleaning and maintenance. All the hoppers can stay open.
- Counting function (mode).
- IP65 certified.
- Rejects over/underweight product.
- Angle of motor can be adjusted to cater for different products.
- Preselection of up to 99 types of program.
Special characteristics
- Modular electronic system makes additions and maintenance much easier and inexpensive.
- Much simpler HMI property management software/program.
- HMI program can be updated by the U-drive (U-disk).
- PLC control system applied to the scale results in much lower failure rate.
- Software updateable/upgradeable through memory card.
- Optional remote control system.
- Optional: Ethernet board.
IGP10x2L16
Technical Data
- Fitted with 10+10 loading compartments (cells)
- Hopper capacity 1.6 L
- Precision weighing between ±0.1 – 2gr.
- Maximum capacity 10 – 1,000 gr.
- Stepper motor driven (no need for compressed air)
- Maximum weighing speed 120 ppm/2*60 ppm
- IP65 protection
- Measurements: 2300x1530x1720 mm
- Approximate weight: 600 kg.
- Stainless steel finish.
Unit formed of:
- Central rotating Hopper
- Anti-condensation system using injected air when machine is stopped.
- Ten+Ten independently tilting, horizontal vibrators equipped with variable electronic controls.
- Ten+Ten feeder hoppers each with stepper motor with a capacity for 1.6 litres.
- Ten+Ten weighing hoppers each with stepper motor with a capacity for 1.6 litres.
- Ten+Ten weight sensors.
Application
- This machine is suitable for weighing granules such as cereals, seeds, granulated coffee and also pasta, sweets, potato chips, nuts, biscuits, chocolates, pet food, frozen food and so on.
- It is also suitable for non-food products such as nuts and bolts and plastic components.
Main characteristics
- The original program can be reset.
- Easy cleaning and maintenance. All the hoppers can stay open.
- Counting function (mode).
- IP65 certified.
- Rejects over/underweight product.
- Angle of motor can be adjusted to cater for different products.
- Preselection of up to 99 types of program.
Special characteristics
- Modular electronic system makes additions and maintenance much easier and inexpensive.
- Much simpler HMI property management software/program.
- HMI program can be updated by the U-drive (U-disk).
- PLC control system applied to the scale results in much lower failure rate.
- Software updateable/upgradeable through memory card.
- Optional remote control system.
- Optional: Ethernet board.
IGP14-16
Technical Data
- Fitted with 14 loading compartments (cells)
- Weighing done on standard loading cells with an overload stop.
- Divisions of 0.1 grams.
- Precision weighing between ±0.1 – 1.5 gr
- Maximum capacity 10 – 800 gr.
- Stepper motor driven (no need for compressed air)
- Maximum weighing speed 120 r.p.m.
- Stainless steel finish
Unit formed of:
- Rockwell electronics
- Central rotating Hopper
- Anti-condensation system using injected air when machine is stopped.
- 14 independently tilting, horizontal vibrators equipped with variable electronic controls.
- 14 feeder hoppers each with stepper motor with a capacity for 1.6 litres.
- 14 weighing hoppers each with stepper motor with a capacity for 1.6 litres.
- 14 weight sensors.
Application
- This machine is suitable for weighing granules such as cereals, seeds, granulated coffee and also pasta, sweets, potato chips, nuts, biscuits, chocolates, pet food, frozen food and so on.
- It is also suitable for non-food products such as nuts and bolts and plastic components.
Main characteristics
- The original program can be reset.
- Easy cleaning and maintenance. All the hoppers can stay open.
- Counting function (mode).
- IP65 certified.
- Rejects over/underweight product.
- Angle of motor can be adjusted to cater for different products.
- Preselection of up to 99 types of program.
Special characteristics
- Modular electronic system makes additions and maintenance much easier and inexpensive.
- Much simpler HMI property management software/program.
- HMI program can be updated by the U-drive (U-disk).
- PLC control system applied to the scale results in much lower failure rate.
- Software updateable/upgradeable through memory card.
- Optional remote control system.
- Optional: Ethernet board.
IGP14-25
Technical Data
- Fitted with 14 loading compartments (cells)
- Weighing done on standard loading cells with an overload stop.
- Divisions of 0.1 grams.
- Precision weighing between ±0.2 – 2 gr
- Maximum capacity 10 – 2000 gr.
- Stepper motor driven (no need for compressed air)
- Maximum weighing speed 120 r.p.m.
- Stainless steel finish.
Unit formed of:
- Rockwell electronics
- Central rotating Hopper
- Anti-condensation system using injected air when machine is stopped.
- 14 independently tilting, horizontal vibrators equipped with variable electronic controls.
- 14 feeder hoppers each with stepper motor with a capacity for 2.5 litres.
- 14 weighing hoppers each with stepper motor with a capacity for 2.5 litres.
- 14 weight sensors.
Application
- This machine is suitable for weighing granules such as cereals, seeds, granulated coffee and also pasta, sweets, potato chips, nuts, biscuits, chocolates, pet food, frozen food and so on.
- It is also suitable for non-food products such as nuts and bolts and plastic components.
Main characteristics
- The original program can be reset.
- Easy cleaning and maintenance. All the hoppers can stay open.
- Counting function (mode).
- IP65 certified.
- Rejects over/underweight product.
- Angle of motor can be adjusted to cater for different products.
- Preselection of up to 99 types of program.
Special characteristics
- Modular electronic system makes additions and maintenance much easier and inexpensive.
- Much simpler HMI property management software/program.
- HMI program can be updated by the U-drive (U-disk).
- PLC control system applied to the scale results in much lower failure rate.
- Software updateable/upgradeable through memory card.
- Optional remote control system.
- Optional: Ethernet board.
IGP14-50
Technical Data
- Fitted with 14 loading compartments (cells)
- Weighing done on standard loading cells with an overload stop.
- Divisions of 0.1 grams.
- Precision weighing between ±1 – 5 gr
- Maximum capacity 100 – 3000 gr.
- Stepper motor driven (no need for compressed air)
- Maximum weighing speed 70 r.p.m.
- Stainless steel finish.
Unit formed of:
- Rockwell electronics
- Central rotating Hopper
- Anti-condensation system using injected air when machine is stopped.
- 14 independently tilting, horizontal vibrators equipped with variable electronic controls.
- 14 feeder hoppers each with stepper motor with a capacity for 2.5 litres.
- 14 weighing hoppers each with stepper motor with a capacity for 2.5 litres.
- 14 weight sensors.
Application
- This machine is suitable for weighing granules such as cereals, seeds, granulated coffee and also pasta, sweets, potato chips, nuts, biscuits, chocolates, pet food, frozen food and so on.
- It is also suitable for non-food products such as nuts and bolts and plastic components.
Main characteristics
- The original program can be reset.
- Easy cleaning and maintenance. All the hoppers can stay open.
- Counting function (mode).
- IP65 certified.
- Rejects over/underweight product.
- Angle of motor can be adjusted to cater for different products.
- Preselection of up to 99 types of program.
Special characteristics
- Modular electronic system makes additions and maintenance much easier and inexpensive.
- Much simpler HMI property management software/program.
- HMI program can be updated by the U-drive (U-disk).
- PLC control system applied to the scale results in much lower failure rate.
- Software updateable/upgradeable through memory card.
- Optional remote control system.
- Optional: Ethernet board.
