Irta VX STD INC Tilted Packaging Machine

IRTA Group > Vffs Packaging machines  > Multiformat packaging machines > Irta VX STD INC Tilted Packaging Machine

Irta VX STD INC | Multiformat Tilted Packaging Machine

The Irta VX STD INC tilted packaging machine maintains a fixed inclined angle of 35º although this angle may be regulated if required.

The Irta tilted packaging machine keeps breakage at a minimum while increasing productivity. It is specially recommended for delicate food ítems such as: muffins, chocolate, iced products etc., and for long products or for all types of product in general where there is a risk of damage while falling from the hopper to the bag.

This is a multiformat packaging machine which admits the most common bag types: pillow type or block bottom pillow type.

Vffs Tilted Packaging Machine

BAGS WHICH THEY MANUFACTURE

SPECIAL MACHINE TO PREVENT BREAKAGE OF DELICATE ITEMS: Muffins, chocolates, iced products, etc., or also long products.

FUNCIONES DE ENVASADORA

Film feed

Automatic film feed by means of servo drive unwinding system.
An electronically controlled linear unwinding system is applied tangentially to the reel.

Shaping/Forming

The configuration of the machine allows us to produce a wide range of sizes from 40mm to 350mm (bag width). It also permits the of use both round and rectangular formers with vertical, central or asymmetrical seams.
Production of pillow type bags with central or side (invisible) seams.

Filling

When trying to optimize production, filling is one of the elements to take into consideration. Our system guarantees perfect synchronization between the dosage unit, the pull system (freefall/freeflow) and the jaw sealers taking into account the type of product and the type of seam which the plastic requires.

Sealing and cutting

A correct thermoseal, which ultimately determines the quality and impermeability of the package, depends on the length of time of the sealing, the compression of the jaws and the temperature used. Another extremely important factor in optimizing productivity is adjusting the horizontal jaw according to the shape of the bag.

SPECIFICATIONS

  • Chassis finish: AISI-316 stainless steel and anodized aluminium.
  • Maximum output: 110 cycles/min
  • Dimensions (mm): 2642 x 1592 x 1799 mm.
  • Approximate weight: 825 kg
  • Maximum reel width: 780 mm
  • Maximum reel diameter: 400 mm
  • Diameter of reel mandrel: 75 mm
  • Type of protection: IP 55
  • Power supply: 230/400VCA
  • Air consumption: 12 NI/cycle
  • Energy consumption: 5.5 KVA
  • Bag width: (min-max): 50-350 mm
  • Bag length (min-max): 40-500 mm
  • Adjustable inclination of 0º to 35º by means of spindle motor operated from control panel.

ELECTRONICS

  • Equipped with the latest electronic and servo drive technology (Rockwell).
  • Servo drives on the pulling system and the sealing jaws.
  • BUS ETHERNET interface control.
  • 10” colour touch screen.
  • Incorporated Motion control drive systems.
  • Conveyor system powered by Becker vacuum pumps.
  • FESTO Pneumatics.
  • Temperature, time and sealing pressure controlled from touch screen.
  • Ability to memorize formats. Easy, quick change-over of forming parameters.
  • Display in several languages.

FUNCTIONAL CHARACTERISTICS

  • Safety system around jaw sealing unit.
  • Block bottom system.
  • Tilted tray at product output.
  • Macular detector for centering the length of the bag.
  • Manual coil alignment adjustable from the control panel.
Have any questions? Would you like further information about any of our machines? If so please contact us for the details.